York Audio — KW 412 M25-SH (WAV) [IR library]

Microphones used in this Cab Pack

Dynamic:
57m — Based on a modern Shure SM57
57v — Based on a vintage Shure Unidyne III SM57
58 — Based on a Shure SM58
SM7 — Based on a vintage Shure SM7
421m — Based on a modern Sennheiser MD421
421v — Based on a vintage Sennheiser MD421
906 — Based on a Sennheiser e906
M69v — Based on a vintage Beyerdynamic M69n
M69m — Based on a modern Beyerdynamic M69 TG

Ribbon:
121- Based on a Royer R-121
160 — Based on a Beyerdynamic M160
313 — Based on a Shure KSM313
4119 — Based on a vintage STC 4119

Condenser:
U47 — Based on a Telefunken U47
U67 — Based on an ADK U67
U87 — Based on a Dachman Audio U87i
184 — Based on a Neumann KM 184
414 — Based on an AKG C414

York Audio is proud to present an IR pack unlike anything we’ve released so far. The KW 412 M25-SH Cab Pack is based on a Kerry Wright 4×12 cabinet loaded with UK made Celestion G12M 25w Greenback speakers. Kerry custom built this cabinet for fusion guitar legend Scott Henderson, and it was an honor to work with Scott in creating a truly special collection of IRs that faithfully replicate the sound of his personal cabinet. The tone is utterly inspiring with a warm and thick low end, signature vocal Greenback midrange, and an incredibly detailed and articulate top end with remarkable note definition and string to string clarity.

This pack is the culmination of months of hard work undergoing extensive testing and fine-tuning every detail in order to give you the most authentic representation of this legendary cabinet only the fortunate few who own a Kerry Wright 4×12 have experienced. You’ll find the standard York Audio feature set with captures of single mics and multi-mic Mixes as well as a “Scott Henderson” folder containing his personal mic placements he uses on this cabinet.

There are also three custom artist signature Mixes created for Jim Adkins of Jimmy Eat World, which he is currently using for his live tones. He immediately connected with this cabinet and said «The closer-to-real factor is big enough (to retweak and reprogram his sounds around these IRs).» These Mixes are labeled «Mix JA 1-3» and sound fantastic!

To make sure we did this cabinet justice, we made substantial studio upgrades which now include mastering grade conversion, more microphones, and more mic preamps. But the feature we’re most excited about introducing with this IR pack is the addition of new Stereo Room captures and Stereo Mixes that give you a natural stereo image using real room ambience. These tools can give your tone an “amp in the room” feeling when played through headphones or a stereo monitoring system.

Here’s what Scott Henderson had to say:

“I’m blown away by the York Audio KW 412 M25-SH. Justin York has captured my beloved 4×12 Kerry Wright cabinet and I can’t hear ANY difference! This is absolutely life changing for me!”

-Scott Henderson

Microphones used in this Cab Pack

Dynamic:
57m — Based on a modern Shure SM57
57v — Based on a vintage Shure Unidyne III SM57
58 — Based on a Shure SM58
SM7 — Based on a vintage Shure SM7
421m — Based on a modern Sennheiser MD421
421v — Based on a vintage Sennheiser MD421
906 — Based on a Sennheiser e906
M69v — Based on a vintage Beyerdynamic M69n
M69m — Based on a modern Beyerdynamic M69 TG

Ribbon:
121- Based on a Royer R-121
160 — Based on a Beyerdynamic M160
313 — Based on a Shure KSM313
4119 — Based on a vintage STC 4119

Condenser:
U47 — Based on a Telefunken U47
U67 — Based on an ADK U67
U87 — Based on a Dachman Audio U87i
184 — Based on a Neumann KM 184
414 — Based on an AKG C414

Ambient Mono:
ROOM 1, 2, and 3 — Captured with a Telefunken U47
REAR 1 and 2 — Captured with a Telefunken U47
SIDE — Captured with a Telefunken U47

Ambient Stereo:
Small Room (RMS) 1-5 — Captured with an AEA R88 in cabinet isolation room.

Large Room (RML) 1-5 — Captured with an AEA R88 in studio’s control room.

All products have been tested with Fractal Audio Systems™, Line 6™, Strymon™, and Kemper™ hardware, as well as DAW plug-ins to ensure seamless integration with your digital modeling units.

York Audio products are licensed, not owned. It is illegal to share York Audio products, so please support our brand and ensure more great content by purchasing your desired products. All sales are final, as there are no refunds on digital goods.

All Cab Packs come in .WAV format in 24-bit 96k, 48k, and 44.1k files.
All IRs are 500ms for maximum resolution. Hardware units that require shorter files will automatically truncate 500ms files to the unit’s preferred length upon import.
Natural Phase and Minimum Phase versions are provided.
Fractal Audio™, Line 6™ Helix, Atomic™ Amplifire, and most IR loading amp modelers utilize 48k files.
Kemper™ units ulitize 44.1k files.
Strymon™ Iridium and BOSS™ units utilizes 96k files.
.